LEE MACHINE SHOP

827 SE 43^rd Street

Topeka, Kansas 66609

785-266-7714      ---    JLee9@cox.net

Est. 2003  --  Quality products for the discriminating modeler

Spring 2008 price list

Propeller Scribes        $7.00

• Standard -  ¼” hole – up to 12” diameter
• also available in 1/8”, 5/16”, 3/8”, 6mm, 7mm, 7.8mm (F2D), 8mm
• prop lengths to 24” available

5 oz Fuel syringes with o-ring plunger        $23.00    

• Plunger only with o-ring    $15.00
• Standard Buna-N o-ring (replacement  .25)
• Silicone o-rings available $1.00 extra

Features positive stop to prevent dumping fuel on your clean white pants

2 oz Fuel syringes with o-ring plunger      $16.00

• Standard Buna-N o-ring   (replacement  .25)
• Features positive stop

Venturies    $8.00

·          OS FP 10, 15, 20, 25, 35, 40

·         OS LA  15, 25, 40, 46

·         Delrin .235 –.310  (specify size)

·         Also available for - Fox 35X, 36X  (3/8 sq aluminum stock)         

·         Enya 35 III (the round one)

·         OS Max-S 35   Delrin -  .280 ID

·         Brodak 40   Delrin  - .285, .290, .295  ID

Plug Wrench    $5.00

·               Available in short, medium and long reach

Finger Drills

·         1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32

·         Drill bits permanently set into knurled aluminum handle

·         $3.50 each, 3 for $10.00, 5 for $16.00, 7 for $22.00

Ball Drivers     $6.00

·    1/16, 5/64, 3/32, 7/64, 2mm, 2.5mm

·    Shaft permanently set into knurled aluminum handle

Long Shaft Ball Driver    $7.00

·     5/64, 3/32, 7/64

·    Shaft permanently set into knurled handle   

Line Wrapper      $20.00

·Available with 28 gauge (.013 dia) or 26 gauge (.016 dia) copper wire

·¼ lb spools copper wire  26 and 28 gauge $5.00

Gasket Cutter      $40.00

·         Uses #11 blade

·         Suitable for paper and composition gasket material or stencil

·         Will cut  5/8” to 4” diameter

·         Replacement blades    $1.00

Long Arm Gasket Cutter      $45.00

·         Uses #11 blade

·         Suitable for paper, gasket material, plastic film and stencils

·         Will cut 5/8” to 8” diameter

·         Replacement blades    $1.00

Derek Moran Line Clip Bender    $25.00

·         As seen in Stunt News  May/June 2006

·         Bends line clips in 1/16” increments

·         .051 Hard Stainless wire available in 12” lengths  $0.50 ea 

Propeller Bushings        $2.00

• 1/4” Inside diameter – 3/8” Outside diameter
• 6061 T-6 Aluminum

Threaded Aluminum Rod    $2.00

• 1/4” x 28 Threaded Aluminum – 2 inch length
• 6061 T-6 Aluminum
• Just right for those vintage Froom and Veco spinners

Veco and Froom Aluminum Spinners

·         Check on availability!!

·         Backplate turned from 6061 aluminum

·         Fitted to the spinner  

1” Spun Aluminum Spinner  $20.00

• Turned aluminum backplate – 6061 T-6
• Available with 5-40, 3mm x 0.5, 4mm x 0.7 threaded nose and union nut
• Weighs approximately ¼ ounce

Propeller Truer-Upper  $12.00

• Trues the drive face of the prop to the hole

Nose Ring Sander -  2 1/8” Diameter - $16.00,  2 ½” - $18.00,  3 1/8” - $20.00

• Sands the front of the plane true to the engine shaft for perfect spinner fit
• Available for 1/4”, 5/16”and 7mm  shafts, other sizes available on request

Kansas Residents add 7.45% sales tax

Payment by Check, Money Order or on-line with PayPal

Shipping and handling will be added